Split Air Conditioning System Installation
The best way to explain a mitsubishi split system air conditioner is that it consists of two units. One unit cools the air, and another unit heat it. When you install an air conditioner, you may be given the choice of installing an air conditioning system that uses split cooling and split heating. This means that the air is cooled one unit at a time and reheated the next. The downside to this is that the cooling unit takes up valuable space, and also, you have to remember to open or close the door when you are using the room.
The mitsubishi split system air conditioner has been on the market for some years now. This type of system is also known as double-box, single box, or even multiple-box systems. If you find that you cannot afford the cooling costs of a single-box system, you should consider a dual system air conditioner. This will allow you to keep the same cool air in the room, but the cooling unit will also be larger and take up more space.
Installing a split air conditioner is much like putting in a refrigerator:
- You will remove the standard components from your old air conditioner and set them aside.
- You will separate the two cooling chambers by using duct tape to seal the ducts.
- You will put your new air conditioner back into the previous compartment.
You may even want to anchor the ducts to the wall so that there are no leaks.
Now you will need to install your new mitsubishi split system unit. However, before you do this, you must ensure that your home ventilation system is working properly. If your system is not operating properly, your new system air conditioner will not work. You can check the ducts for blockages or clogs, or excess moisture. In some cases, you might need to run some ducts to ensure adequate ventilation.
Once your home ventilation system is running properly, you can replace the two air conditioners in your room. However, before you do this, you must turn off the utilities to your home, as well as to any other rooms that you will be cooling with your system air conditioner. Before installing your new air conditioner, make sure that you read all of the instructions carefully. There are certain temperatures when using an air conditioner that you must know about. This includes the time of the year and the time of the day.
If you have a hot summer, you must keep the windows closed during the hottest part of the day, which is about early morning. During the cooler part of the day, you should open the windows. Your split system air conditioner should have a temperature setting of about eighty-eight degrees, and you should leave it set that way at all times. If it becomes too hot, you might turn it down a few degrees.